AUDIOPHONY TI 500

Digital amplifier 2 x 250W into 4 ohms or 1 x 500W into 8 ohms - 1 unit.

GENERAL CHARACTERISTICS

• Class D Amplification
• Switching power supply ensures a very low weight
• Methods functioning stereo, parallel or bridge
• Setting extremely accurate and independent level for each channel
• LED indicator to display the status of the amplifier
• Convection cooling
• Balanced inputs on XLR and TRS
• unbalanced input on RCA
• Outputs on screw terminals / banana or Speakon® 4 points
• thermal protection and against independent direct current on each channel
• Compatible with standard 19-inch rack mounting

SPECIFICATIONS

• Output power stereo:
  - 8 Ohms: 2 x 130 W RMS
- 4 Ohms (minimum): 2 x 250 W RMS
• Output power bridged mono:
- 8 Ohms (minimum): 1 x 500 W RMS
• Signal-to-Noise Ratio: Less than 90 dB
• Input sensitivity: 4 dBu +/- 2dB
• Distortion:
- A 1 KHz and 1/2 of power: less than 0.1%
- From the intersection at full power - 65 dB at 1 KHz
• Frequency Response (4 Ohms / 1W): + 0.5dB; 20Hz-20KHz
• Input Impedance: 15 Ohms unbalanced / 30 Ohms • Level symmetric clip: 0dBr
• Cooling: Convection
  • Connectors: - Input: XLR and TRS balanced + unbalanced RCA - Output: Screw Terminal + Speakon® 4 points
• Settings: - Front: Power switch / Settings Level 1 and 2 - Rear: Selector mode
• Indicators: Protect (Red) / video (yellow) / Signal (green)
• Protections: Against short-circuit / current limiter / Counter drift voltage and thermal
• Power supply: 100Vac / 230Vac - 50 / 60Hz
• Dimensions: 482 mm x 44 mm x 330 mm
• Net Weight: 4.7 Kg